Foshan ST Machineries Technology Co., Ltd.
+8613925449363

Maintenance Of High-frequency Pipe Making Machine

Nov 08, 2024

The maintenance of high-frequency pipe making machine mainly includes the following aspects:

Regular cleaning: Regularly clean the appearance and interior of the high-frequency pipe making machine, clean the dust, oil and other debris on the surface of the equipment, and keep the equipment well ventilated. At the same time, clean the dust, debris, water stains and other bad substances inside the equipment to ensure that the inside of the equipment is clean.

Automotive High-frequency Tube Mill

Lubrication: Regularly add lubricating oil to the rotating parts of the high-frequency pipe making machine such as slides, screws, push rod shafts, etc. to keep the equipment in good lubrication condition. In addition, some parts in the high-frequency welded pipe unit also need to be lubricated regularly to reduce friction and wear and improve the working efficiency of the unit.

Inspection and maintenance: Regularly check the electrical system, mechanical system and cooling system of the high-frequency pipe making machine to ensure the normal operation of each part. Check the condition of components such as high-frequency tubes, relays, fuses, etc., and replace damaged parts in time. At the same time, check the operating conditions of equipment such as transmission systems, pulleys, motors, etc. to ensure their normal operation.

Commissioning and maintenance: Regularly debug the parameters of various parts of the high-frequency pipe making machine to ensure the normal operation of the equipment. Regularly replace the equipment lubricating oil and lubricate the moving parts to prevent failures caused by poor lubrication. In addition, regularly maintain the high-frequency pipe making machine, such as replacing internal parts of the equipment and adding accessories, to ensure long-term stable operation of the equipment.

‌Clean the electrical control cabinet: Regularly clean the relays, contactors and other components of the equipment electrical control cabinet to avoid dust deposition affecting their normal operation.

‌Pay attention to the operating status: When the unit is working, pay close attention to the unit's current, voltage, temperature and other parameters. If any abnormality is found, the unit should be stopped for inspection in time, and adjusted and repaired as needed.